Soleus GPS Pulse – User Manual
•
Press S5 to set the hour, minute, T1/T2 and Alarm On/Off.
Step 4) Acquire Satellite signals:
In order to get the correct time of day and begin using your watch, you have to acquire the
Satellite signals. It may take a few minutes to get the signals.
4.1)
Go outside to an open area away from tall buildings and trees. Orient the GPS antenna
towards the sky for best reception. The antenna is located at the 12 o’clock position of
the watch.
4.2)
Stand still and do not begin moving while locating the Satellites until the GPS signals are
already received.
4.3) How to Turn ON the GPS:
Following are the possible ways to turn on the GPS.
4.3.1)
Press S1
in
TIME
mode
.
The Watch will display the GPS / INDOOR selection
screen. Select GPS and press S5. The watch will start searching for GPS and go
to RUN mode once signal is received.
4.3.2)
Press S7
to enter the
RUN, CHRONO, HRM, TIMER or HRM. Select
GPS
and
press S5 to confirm.
4.3.3)
Press and hold S7
for
2-3 seconds from any mode while GPS is initially
OFF.
IMPORTANT NOTE:
v
After GPS signal is received, the HRM will also automatically search.
v
When CHRONO is running, you can turn OFF the GPS only.
v
While CHRONO is stop or save/reset, press and hold S7 will turn OFF the GPS.