background image

 

 11 

 
 

 

OPERATING YOUR AIR CONDITIONER 

REMOTE CONTROL 

Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries. 

1. 

ON/OFF 

- Press the ON/OFF button to turn 

the A/C on or off. When the unit is turned off, 
the Timer and sleep functions will be can-
celled. The set temperature will be saved. 

2. MODE 

- Press the MODE button to change 

the operating mode. You can choose AUTO, 
COOL, SAVE (energy saver), FAN only, or 
Dry (Dehumidifier). The temperature will not 
be displayed when AUTO mode is selected.

 

3. 

“—”- 

Press the “-” button to decrease the 

temperature when the unit is on. Press and 
hold the “-” button for more than 2 seconds to 
quickly  cycle through the temperature op-
tions. Stop pressing the button when the de-
sired temperature is displayed. The tempera-
ture cannot be set in auto mode. Temperature 
range: 61°F - 86°F. 

4. “+” 

Press the “+” button to increase the 

temperature when the unit is on. Press and 
hold the “+” button for more than 2 seconds to 
quickly cycle through the temperature op-
tions. Stop pressing the button when the de-
sired temperature is displayed. The tempera-
ture cannot be set in auto mode. Temperature 
range: 61°F - 86°F.

 

5. 

FAN 

- Press the FAN button to turn change 

the FAN options. You can choose between 
four speeds and auto mode. The fourth fan 
option is only available in cooling and energy 
saver modes.   

6. IFEEL 

MODE 

- Press the IFEEL button to 

change the thermostat sensor from the air 
conditioner to the remote location. The air con-
ditioner will cool the area depending on the 
location and set temperature of the remote 
control. Take the remote control with you so 
the air conditioner cools the room to your loca-
tion. The Remote must be in line of site of the 
A/C for iFeel to operate correctly.

 

7. 

SLEEP MODE 

- Press the SLEEP button to 

turn SLEEP mode on or off. SLEEP mode is 
set to off automatically. When SLEEP mode is 
selected the timer can be adjusted. SLEEP 
mode is not available in Fan or Auto mode. 
Sleep mode automatically reduces set tem-
perature by 2°F after one hour and 4°F after 
two hours. This feature limits compressor us-
age and in turn enhances energy saving while 
you are sleeping.

 

 

8. 

TIMER - 

Press the TIMER button when the 

unit is off to set up the Auto-on timer. The Auto
-on time can be set between .5 - 24 hours. The 
icons “T-ON” and “H” will flash for 5 seconds. 
Start selecting the time using the “+” and “-” 
buttons before the icons stop flashing. The 
time will increase/decrease in .5 hour incre-
ments with each press of the “+” or “-” buttons.  
To cancel the Auto-on time, manually press 
the ON/OFF button to turn the unit on. 

 

Press the TIMER button when the unit is on to 
set up the Auto-off timer. The Auto-off time can 
be set between .5 - 24 hours. The icons “T-
OFF” and “H” will flash for 5 seconds. Start 
selecting the time using the “+” and “-” buttons 
before the icons stop flashing. The time will 
increase/decrease in .5 hour increments with 
each press of the “+” or “-” buttons.  To cancel 
the Auto-off time, manual press the ON/OFF 
button to turn the unit off. 
 
Once the Auto-on or Auto-off time is set, the “T
-On” or “T-Off” and “H” will blink for 2 seconds. 
After 2 seconds the set temperature will be 
displayed. 

Содержание GM-WAC-06ESE-C





















Отзывы: