Auto Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button on the control panel.
4) Press the
MODE
button until the “
” icon appears on the control panel display. Select the fan speed
by pressing the
FAN SPEED
button.
NOTE:
During AUTO mode, the unit operates in
Heating
mode when the room temperature is below 68
°
F,
Dehumidifier
mode when the room temperature is between 68
°
F to 80
°
F. And
Air Conditioner
mode when
the room temperature is above 80
°
F.
Sleep Mode
(This mode can only be selected when using the Remote control )
1) To set Sleep mode, make sure the unit is in Air Conditioner mode.
2) Press the
SLEEP
Button on the remote control. The “
” icon appears on the control panel display.
3) When in
SLEEP
mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner mode, the temperature setting will gradually increase to 2
°
F above the original set
temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5) When in Heating mode, the temperature setting will gradually decrease to 2
°
F below the original set tem-
perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Air Purifier Mode - See Page 13
Compressor Indicator
The
icon will light up on the control panel display when the compressor turns on. The
icon will
turn off when the compressor shuts off.
12
