10
www.solencosa.co.za | [email protected] | 086 606 8915
OPERATION The Operation light will illuminate when the compressor
within the unit is running to extract moisture from the air. Please note
this may not light up immediately when the unit has started, and will
go out when the desired humidity is reached.
Humidity Level & Timer 2 digit display
The led indicator performs the following functions:
When the unit is plugged in - It will indicate the room humidity level
When one of the humidity setting buttons is pressed - it
will indicate the set humidity, before reverting back to
showing the current humidity after a few seconds.
When the timer button is pressed it will indicate in how
many hours the timer function will operate, before reverting back to
showing the current humidity after a few seconds.
Notes: When the humidity level is outside the normal operational
parameters the display will show LO or HI. If ambient humidity is lower
than 20%, it will show
“LO”
If ambient humidity is higher than 90%, it
will show
“HI”.
The dehumidifying function will be deactivated until
the humidity has re-entered the normal range to prevent damage to
theunit.
Optional carbon filter (air purification function)
Take out the carbon filter from bag and insert it on the dehumidifier. It
is suggested to vacuum the carbon filter every 2-3 weeks and
change them every 3-6 months to always keep the room fresh and
odour free.
