Solenco Comefresh CF-8608, Руководство пользователя

Страница: 10 / 13

▲Sleep mode warning
-When you press “SLEEP” button, the sleep mode indicator will blink for 10 seconds,
then all LED lights will turn off. The appliance will keep operating in current settings. To
change settings in Sleep mode, touch any button to turn the LED lights on again. After
making changes, sleep mode indicator will blink again for 10s before LED lights turn off
again.
▲Filter change indicator
-HEPA with antiviral filter and Activated Carbon filter change: After operating 4320
hours, the “replace filter” light will turn on (Red), indicating you need to replace the
HEPA with antiviral filter and Activated Carbon filter. After replacing the filters, press the
reset button, situated on the side of the appliance (shown in diagram below) using one end
of a paperclip to reset the indicator light.
Note: The HEPA with antiviral filter and the activated carbon filter have a similar lifetime,
therefore they have to be replaced at the same time.
Filter replacement
▲Pre-filter maintenance
-The pre-filter can be washed with water once removed from the unit. Make sure it’s
properly dry before placing it back into the appliance.
-Do not use sharp objects to clean the pre-filter to avoid causing any damage.
▲HEPA with antiviral filter and Activated Carbon filter maintenance and
replacement
-Every three months, remove the HEPA with antiviral filter and Activated Carbon filters
from the appliance, place in direct sunlight to remove any moisture. Use a vacuum cleaner
with the brush attachment or simply use a soft brush to clean the dust off the filter. This
Reset button