SOLE SLTV23MS2Q, Руководство пользователя, Страница: 9 / 33

22 10
Controls
→ →
Battery installation
u
Inserting batteries
1. Remove the battery cover by pulling it
upward in the direction shown by the arrow.
2. Insert the batteries with correct polarity
( "+" to "+", and "-" to "-" ).
3. Replace the battery compartment cover.
* Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with
new batteries.
* Remove batteries when you won't use the remote controller for a long time. Liquid
leakage from old batteries may cause operation failure.
u
Notes for using remote controller
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the
remote control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In
this case, darken the room or move the TV.
14.
x
CH
y
(Channel Up/Down)
Selects next Channel or a menu item.
15.
Ï
VOL
q
(Volume Up/Down)
Adjusts the sound level.
Adjusts menu settings.
16. OK
Accepts your selection or displays the current mode.
17. CC
Set the caption function.
18. MEMORY
Stores or deletes the current channel.
19. DTV
Selects DTV mode directly.
20. PIP
Displays a PIP(Picture In Picture) screen.
21. INPUT
Selects the AV source of sub picture in
PIP mode.
22. SWAP
Switches a main picture for sub picture in PIP mode.
The PIP screen will disappears after pressing the
SWAP button.
23. POSITION
Selects a position of PIP screen.
24. MODE
Selects a PIP screen mode ; 16:1, 9:1 and 3:1 mode.
25.
x
CH
y
Selects a Channel when RF signal is displayed in PIP
mode.
26.
Ïq
Adjusts the sound level.
Adjusts menu settings.