SOLE SLTV20MS3, Руководство пользователя

Страница: 22 / 29

5-1
5-2
The Standard Signal Modes for PC Monitor
Resolution Vertical Frequency Horizontal Frequency Clock Frequency Polarity
(H V) (kHz) (Hz) (MHz) (Vert./Hor.)
640 480 31.469 59.94 25.175 -/-
720 400 31.469 70.087 28.322 -/+
800 600 35.156 56.250 36 +/+
800 600 37.879 60.317 40 +/+
1024 768 48.363 60.069 65 -/-
1024 768 56.476 70.069 75 -/-
1280 768(Optimal) 47.693 59.992 80.125 -/+
When you use it as a PC monitor, depending on signals of a PC, it may not display picture
normally even though it is set for standard mode resolution.
Setting Picture
In case it is not optimally set even though automatically adjusting it, use Picture menu
as below.
- Brightness : Adjust screen brightness
- Contrast : Adjust screen contrast
- Phase : In case it is not optimally set even though automatically adjusting it, use Phase function.
- H. Size : Adjust the Size of the PC Monitor.
- H. Position : Adjust the position of the PC Monitor.
- V. Position : Adjust the position of the PC Monitor.
- Auto Adjustment : In case of using it as a PC monitor, it is automatically set.
NTSC 43
Auto Adjustment
In case of using it as a PC monitor, it is automatically set.
When the set is connected to a PC, the MODE should be set as PC RGB Mode.
- Press button on the remote control to automatically set the
product’s screen status.
- When it is used as PC monitor
Optimal Resolution : 1280 x 768 @ 60Hz
- It may not normally display picture in any resolution out of the optimal resolution range.
- Even though it is automatically adjusted, it may not normally display picture depending
on signals from a PC and in this case, it is recommended to execute Auto Adjustment
for several times.
- Also, it can be set in OSD menu if JOG button is used.
AUTO
42 20 WIDE TFT-LCD TV