© CASWA Pty Ltd – 2014
12 | Page
A box will appear asking you which HoistNet enabled
device you want to connect to:
Select the device that has the load signal to be used and
press <OK>.
If you select a LiftlogXL, another window will popup asking you which hook to connect to (Main, Aux
or Combined Load). Select the desired option and press <OK>.
The popup window(s) will close and you will be returned to the General Configuration Screen.
The bound device will now be shown in the first 'Bound to' field and will indicate that its status has
changed to
Online
.
NB: You will need to ensure that the originating HoistNet
load signal has been calibrated correctly and is powered on.
If you want to bind the second input, repeat the process by
pressing the lower <...> button:
To unbind a HoistNet GateWay input from a HoistNet
device, or to change the bound device, press the <Bind>
button on the Load screen and then select <Unbind> on the
popup box.
