Solco Nadana EH-3200, Руководство пользователя

Страница: 7 / 12

How to Use the Product
4. How to Use the Product
4.1 Preparations before Use
(1) Read this manual carefully.
(2) Install the product in a safe place so that it doesn’t fall.
(3) After installation, place the mineral water bottle on the generator to check if there is water leakage.
4.2 Power and Operation
(1) Connect the power cord to the socket.
(Do not connect to a socket with other products and connect it by itself whenever possible.)
(2) Hot water, hydrogen water and cold water icons on the LED display will be turned on.
(3) After the hydrogen water icon is turned on, hydrogen water will automatically start to generate.
- The product will continue the automatic generation of hydrogen water and enter standby mode.
- The hydrogen water icon will automatically turn off after the generation of hydrogen water is completed.
※ To obtain hydrogen water successfully, dispense water after the hydrogen water icon is turned off.
※
Regarding the use of cold and hot water, please note the following:
- After installation, place the mineral water bottle on the generator and make sure the water flows into the water
tank, then turn on both hot and cold hydrogen water switches.
- For the first-time installation, allow water circulation in the product.
- After making sure the water intake parts are in good condition, turn on the hot and cold hydrogen water switches
at the back of the product.
4.3 Use of Cold Hydrogen Water
(1) Press the cold hydrogen water intake button. The
hydrogen water icon on the LED display will turn on
and cold hydrogen water is then released.
(2) Release the water intake button to stop dispensing
hydrogen water.
(3) After the water is released, hydrogen water will
automatically generate again.
07