Solax S3121, Руководство пользователя

Страница: 37 / 52

35
Telescopic handle
Turn on the handle switch to make the riser in the released state. After the handle
riser is retracted in place, turn off the handle switch (as shown in Fig. 9-10).
Figure 9 Figure 10
Controller
The controller is fixed in the rear housing to receive the signal from the control panel
and transmit it to the motor, brake and charging stand.
Do not place the controller in a humid area. If the controller has been damped, it must
be completely dry before driving, otherwise the controller will be damaged.
Brake
It is equipped with electromagnetic brake, which can't cut off the brake manually.
When it is necessary to move the scooter manually, the front of the vehicle can be
raised to pull the scooter or folded and pulled.
Motor / Drive assembly
The motor / drive assembly is an electromechanical part that converts battery power
to rear wheel drive energy.