Solax BUGGY PLUS, Руководство пользователя

Страница: 13 / 28

12
Ｓ５０２３
OWNER’S MANUAL
EMI can be produced from different sources such as cellular phones, two-way
radios, radio station, television stations, amateur radio transmitters (HAM), wireless
computer links, microwave signals, paging transmitters, and transceivers used by
emergency vehicles.
The EMI waves can cause unintentional movement of the scooter, or damage
to the controller. Every electrical powered mobility device has a resistance to EMI.
The higher the resistance levels the greater to protection. The intensity of the
interference can be measured in volts per meter, V/M.
EMI becomes more intense as you move closer to the source. The EMI
produced from hand-held radios are of special concern. It is possible to
unintentionally bring high levels of EMI very close to the scooter’s control
system, effecting your movement and braking. The warnings listed below are
recommended to prevent possible interference with the control system of your
scooter.
1.Do not operate hand-held transceivers such as CB (citizens band) radios, or turn
on personal communication devices, such as cellular phones, while the scooter is
powered on.
2.Be aware of nearby transmitters, such as radio or television stations,
and avoid close proximity.
3.If you experience unintended movement or brake release occurs, power off as
soon as it is safe. Please report EMI incidents to local dealer.
4.be aware that adding accessories or components, or modifying the powered
scooter, may make it more susceptible to interference from radio wave sources
(Note: it is difficult to evaluate the effect on the overall immunity of the powered
scooter).
Please switch off power immediately under the following situations:
1. Unintentional scooter movements.
2. Unable to control direction.
3. Unexpected brake malfunction.
3.2 EMI & RFI Information
Electromagnetic interference (EMI) tests have shown to produce adverse
effects on the performance and control of electrically powered mobility devices.