DataHub 1000 User Manual
15
5.4.3 Parameter Setting
Professionals can read and write the inverter through the inverters “modbus opcode”, under which there are
“READ_HOLDING_REGISTERS”,“READ_INPUT_REGISTERS”,“WRITE_SINGLE_REGISTER”and“WRITE
_MULTIPLE_REGISTERS”.
（
Can be operated in batches
）
5.5 Inverter Upgrade
Using DataHub to upgrade the inverter. Click “Upgrade” to select the upgrade file types which include “ARM”,
“MDSP”, “SDSP”, “ARC”, “ARM+DSP”, “BMS_M” and “BMS_S”. Select the corresponding file to upgrade the
inverter.
*
Note: It takes nearly 15-30 minutes to upgrade the inverter. During upgrading, no data will be uploaded.
5.6 DataHub Setting
5.6.1 Internet Setting
Network settings are divided into: “IP setting” and “WiFi setting”.
IP setting: If the user needs to fix the IP, select the correct network card type, turn off the automatic acquisition of IP
address, and set the “IP address”, “subnet mask”, “gateway” and “DNS”.
WiFi setting: Provides the function of connecting to WiFi.
*
Note: Ordinary users do not need to perform any operations if they do not need a fixed IP.
5.6.2 Time Setting