Solatube Ubiflex flashing, Руководство по установке

Страница: 7 / 13

7
Installation Steps
2.2.3 Step 2.2.3 Attach roof flashing tile clips
The three tile clips provided are also used to secure the bottom skirt of the flashing down
onto the roof. Clamp the short "leg" of the clips between two tiles beneath the edge of the
flashing and bend the long "leg" back over the edge of the flashing to clamp it in place.
2.3 Step 3 Adjust top tube angle (if required)
If required, the integral angle within the top tube assembly can be rotated to create an
angle from 0 to 30 degrees to compensate for the pitch of the roof.
How to adjust the integral angle: Carefully peel back the protective film inside the tube
from along the angle seam.
Grasp the top tube with two hands, just below the adjustable angle seam (diagonal).
Use your thumbs and index fingers to rotate the angle section as required.
Adjust the angle so that the top tube assembly aligns with the bottom tube assembly.
Once the angle is correctly set, carefully apply tape to the outside of the tube over the tube
seams and around the angle.
Now remove the transparent protective film from the inside of the top tube assembly.
1 2