10
Use the shiny side of the tape’s backing
paper to rub over the aluminium tape to
produce a smooth, well-bonded surface on
all joins.
On the uppermost extension tube, wrap
the self-adhesive expansion joint seal twice
around the outer diameter of the tube,
approximately 25mm from the top. If no
extension tubes are used, the expansion
join seal is applied to the ceiling tube
assembly.
Slide the extension tube(s) up into the top
tube assembly and gently ease back down
into the ceiling tube assembly, allowing
a 50mm overlap for both. If necessary,
adjust the angles of the top or ceiling tube
assemblies.
Once in place, seal ALL the remaining
seams and joins with the aluminium
tape provided.
For extra strength and rigidity, use the
small self-tapping screws to secure all joins.
Installing the clear lens & ceiling diffuser
With the clear pull tab facing downwards,
insert the clear lens up into the ceiling tube
assembly until its gasket locates into the
channel. Place the ceiling diffuser up into the
ceiling ring, matching the slots, and twist to
secure into place.