2
LOG SET INSTALLATION
Step #4
Once the glass media burner has
been removed, locate the Logset
burner included in the kit LGS-26
as shown in figure 04.
NOTE:
The logset burner can be configured for either Natural Gas or Propane by installing or removing
a collar on the burner venturi. Figure 05 shows the venturi inlet with the collar installed on a burner
configured for Natural Gas. Figure 06 shows the venturi inlet with the collar removed from a burner
configured for Propane.
THIS VENTURI IS NOT ADJUSTABLE.
If you need to convert your burner
from Propane to Natural Gas or vice-versa, please order the appropriate conversion kit for your
appliance.
Step #5
Install the logset burner within the firebox by lowering the burner into the firebox (while keeping the
burner pressed toward the right side of the firebox) then sliding the burner left towards the center of the
firebox to engage the burner orifice as shown in figure 07. Confirm that the burner inlet tube has
engaged the burner orifice.
FIGURE 04
FIGURE 07
Configured for Natural Gas
Configured for Propane
FIGURE 06
FIGURE 05
