solasfires.com
7
LOG SET INSTALLATION
12. Install the single rock as shown below in Figure 12 on the 2 pins projecting up from the rear edge of the burner
top, left of the center log installed in Step 11.
13. Install the pair of single rocks as shown in Figure 13 on the 2 sets of pins projecting up from the left side of the left
burner as shown in below right image (Figure 13).
14. Install the Y-shaped log shown below (Figure 14). The right side of the log locates on 2 pins projecting up from the
burner surface, the left side of the log rests in the joint between the 2 rocks installed in Step 13.
Figure 12
Figure 14
Figure 13
