5
LOG SET INSTALLATION
Step #16
Evenly distribute the included 1lb and 3oz of
lava rock on the exposed burner top. Cover the
burner top completely but do not compress or
“pack” the lava rock tightly. Pay special
attention to tight and hard to reach areas when
placing the media on the burner. It is ok if small
amounts of lava rock are lost over the edge of
the burner. (Figures 17 & 18)
Step #17
Using the log-locating tab on the single rock on
the left side of the burner, rest the small birch
log on the rock and “Y” shaped log while
aligning it with the leading edge of the burner as
shown in figure 19.
FIGURE 17
FIGURE 19
FIGURE 18