solasfires.com
3
LOG SET INSTALLATION
STEP 1
Install the 3-rock cluster on the 2 pins located just right
of the pilot. (Figure 1)
STEP 2
Install the center birch log by placing the left side of the
log on the locating pin left of the pilot. The right side of
the log will rest on top of the 3-rock cluster, rotate the
log so it gently touches the rear enamel panel of the
firebox. (Figure 2)
STEP 3
Install the second, smaller, 3-rock cluster on the
pin located right of 3-rock cluster installed during
step #1. Once the 3-rock cluster is sitting on the pin,
rotate clockwise until the lower left rock touches the
rear edge of the burner. (Figure 3)
STEP 4
Install the right-hand birch log by placing the left side
of the log on the 3-rock cluster installed in previous
step. A groove on the underside of the log which
engages with the leading edge of the burner. The right
side of the log will rest against the right enamel panel
within the firebox. (Figure 4)
INTALLATION OF BIRCH LOG SET
Figure 1
Figure 2
Figure 3
Figure 4
