15
5 Configuration of the large
display panel
After installation and assembly, the large display panel must be configured.
The large display panel comes preconfigured from the factory but may need to be
adjusted depending on the conditions on site.
The following can be set:
> Data source (from which the large display panel receives the data to display)
If the data source is a current meter with pulsed output:
> Starting value for total output (kWh)
> Pulse rate (pulses/kWh)
The settings are made using the button between terminals 6 and 7.
How long the button is pressed determines the result:
Duration
Result
Note
Short press
< 1 second
The value of the number
to be changed is in-
creased by 1
The value is increased
when the button is
released.
Long press
> 1.5 seconds
The number place to be
changed is moved one
position to the left or
the setting is saved
Hold the button down
until the decimal point
moves to the left or to
the next setting value
