damaged or not
tightly secure
on solar
controller
connector port
controller( cannot be pulled off with a firm
tug). Check that there is no damage to
the temperature sensor wire. If there is
damages the temperature sensor will
need to be replaced
Installation
-please ensure the installation is done by a qualified plumber and conforms to
the countries installation requirements. Failure to comply will result in the
warranty being voided.
-The solar panel is waterproof and can be installed outdoors. The controller
and water pump is not waterproof and will need to be installed indoors( in the
roof is ok) or in a waterproof container.
-Please ensure the solar panel is installed in a north facing orientation and for
optimum efficiency at an angle of between 30-37 degrees. (see diagram
below)
-The mounting bracket for the solar panel can be be mounted directly onto the
solar collector panel.
-The controller mounting bracket can be mounted on the roof truss or wall
using the mounting piece provided
