Factory settings and motion detection functions:
The factory setting of the SPSF series switch is light-controlled (at a threshold of 30 Lux).
The lamp automatically lights up when it is dark and turns off when there is light or at
dawn. At night, when no one is around, it operates under power saving mode. When
anyone approaches, its brightness increases by a factor of four. If the air temperature is
close to human temperature, the motion detection may reduce in sensitivity.
1. Environment
❶. Please select the appropriate product according to the installation site’s sunlight
intensity and required operating time. If you are in the northern hemisphere, face the solar
panels towards the south as far as possible when installing the SPSF series; if you are in the
southern hemisphere, face the solar panels towards the north.
❷.
For maximum operation efficiency of the solar panels, make sure the sunlight is not
blocked by buildings or trees.
Notice: Please do not need Press ON button of the small blue remote to turn on
the lamp, because our solar lamps have Automatic Activation Function.
Activation:
Remove the SPSF light from package box, let the solar panel absorb energy from sun, connect
the waterproof cable between solar panel and lamp, then the lighting system can be
activated, the SPSF light will be lighting automatically at night.
If you want to check whether the SPSF light are lighting during the daytime:
Cover the solar panels with shelters, the lamp will be lighting.
Press Demo Button after the lighting system has been activated, the lamp will be
lighting for a few mins then turn off automatically.
How to turn on our solar street lights?
Pole:
Recommend use the upper diameter of pole: 2.99 inch (see Figure 1),
Recommend use 39.37 in arm pole (see Figure 2)
Installation
