Step 3: Dispenser Installation
Hardware provided with the dispenser:
o
Key
o
(4) Screws #10 x 1”L, Phillips Head
o
(4) Wall Anchors
Through the front opening of the panel, slide the dispenser all the way in,
make sure that the back of the dispenser is in contact evenly with the back of
the cabinet. There are two options to secure the dispenser:
Option 1: Drive the four screw
# 10
(provided) into the mounting
holes on the back of the dispenser to secure the dispenser to the
cabinet.
Caution N
ote
:
T
he length of the screw
# 10
is 1 inch, which may be
longer than the thickness of the
drywall
on the back of the cabinet.
If it is not acceptable, please use option 2.
Option 2: Drive the four screw
# 8
(provided) into the front mounting
holes on the
stainless steel panel
to secure the dispenser
into place.
The dispenser is now ready for Roll Support installation and paper loading.
Figure
8
.
877
7
002
Released
February
22
201
9
6
N
ote
:
If using the method described in option 2, it is recommended
to enlarge the front mounting holes of the panel (using an 1/8" drill
bit) prior to the installation. That will help drive the screws in the
metal easier.
