2 |
P a g e
Safety and Installation instructions
© The Solaria Corporation. Contents subject to change without notice.
Document SPS-1006 Rev 02, April 25, 2017
S
AFETY
,
I
NSTALLATION
,
AND
O
PERATIONS
M
ANUAL
1.0
Introduction
This document provides safety and installation information for the Solaria
PowerXT
TM
residential solar modules.
Read this document before installing, wiring, or using this product. Failure to
comply with these instructions will invalidate the Solaria Limited Warranty and
may cause loss, damage or injury.
Limited Warranty
Module limited warranty is described in The Solaria Corporation PowerXT
TM
Warranty. Warranty details may be found at www.solaria.com.
2.0
Safety Precautions
Before installing the modules, read all safety instructions in this document.
Modules produce direct current (DC) when exposed to light. Direct
current can arc across gaps and may cause injury or death if improper
connection or disconnection is made, or if contact is made with exposed
leads. Do not connect or disconnect modules when current from the
modules or an external source is present.
Do not operate the modules in a short circuit condition for extended
periods of time.
Do not artificially expose additional high intensity sunlight directly on the
module.
Do not disconnect modules while under load.
All installations must be performed in compliance with local, regional,
national and international statutory regulations, guidelines, norms and
code requirements.
