5 Use and operation
Storage area filled
9
n
Pressing the button marks all suction probes
10
again as full (e.g. after filling the storage room).
Pressing the Status button changes the probe sta-
tus (colour red: Head is empty; colour green: Head
is full).
n
Red marking means: Probe is suctioned empty.
n
Green marking means: Probe is full.
n
The arrow
11
above the heads shows the currently
used head. Position
C
means that the pellet hose
has been suctioned empty (happens automatically,
lasts a few seconds).
5.4.3 User lock
Fig. 2-12
The function serves as protection against unaut-
horised modification of the control parameters. When
the user lock is active, the parameters of the individual
screens are displayed but cannot be changed. The
active user lock is indicated by the padlock icon
1
in
the screens.
User lock
screen
Fig. 2-13
Enter the password
2
To define a new password (maximum 20 characters).
Password
3
The currently valid password is displayed.
User lock
4
Off
: The user lock is switched off.
On
: Switches on the user lock function. If the display
is not touched for one minute, the user lock is active in
the screens.
Password reset
5
The current password is reset to the value
solarfocus
.
Accept as new password
6
Enter a new password in the input field and press the
button. Note on screen keyboard; Confirm input with
the
button.
5.4.4 Message log
Fig. 2-14
Every fault message which has occurred in the control
unit is recorded here, with the time that it began and
ended. The message with the highest priority is high-
lighted in red, acknowledged messages are highlighted
in green.
Press the
2
button to quit messages. Button
1
opens
the power failure log.
Possible messages
5.4.5 Operating hours counter
Fig. 2-15
14
Operation manual
pellettop
