SOLARFOCUS Pelletel Egance 10, Руководство по эксплуатации

Страница: 17 / 48

5 Use and operation
5.4.6 Qualified personnel menu
Abb. 2-18
1 Service menu > 17
2 IP VNC (for remote access) > 17
3 Sending emails > 18
4 mySOLARFOCUS-App > 28
5 Language selection > 19
6 Date and time > 19
5.4.6.1 Service menu
In the Service menu there are technical (factory pre-
defined) settings for an optimum combustion process
in the boiler. These can only be accessed by qualified
personnel (code input required).
5.4.6.2 IP VNC (for remote access)
The eco
manager- touch
control allows access to the con-
trol screens from a PC or mobile device (e.g. smart-
phone). To do so, the
VNC (Virtual Network
Computing) software is used. The control has an inte-
grated VNC server, while the
VNC Viewer , which is
available free of charge on the Internet, is required for
remote access.
A cable connection is required on site for connecting
the control to the router. Use the Ethernet socket
(type RJ45) on the rear of the control panel (Touch
display).
i
Installation and configuration of this function
must be performed by the customer (i.e. not
included in the commissioning, service and
support activities).
The following points are helpful for setting up a PC/-
router to control the VNC server, which requires know-
ledge of networking technology.
IP configuration
►
To access the IP-VNC icon, select the following
in the control
– Selection menu screen
– Customer menu screen
– Qualified personnel button
► Enter the data for your router. Recommended
process:
–
Select DHCP ON .
Ä The IP address is determined.
– Select the DHCP OFF + Adopt button.
Abb. 2-19
–
The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc.).
– Recommendation: Set a fixed IP address
(=
DHCP OFF ), i.e. the control has a constant IP
address.
Version 1: Install VNC viewer for access from a
local PC (PC in the home network)
►
Download the free VNC Viewer from the Internet,
install it on the PC and start the application.
►
Enter the previously defined IP address of the
control.
– As soon as the VNC Viewer is able to access
the control, a password must be entered.
–
The password predefined by the manufacturer
is
solarfocus
– After login, the screen view of the control can
be seen.
Operation manual pelletelegance 17