Solarflare SFA6902F Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 375

Solarflare SFA6902F Скачать руководство пользователя страница 45

Issue 11

© Solarflare Communications 2014

40

Solarflare Server Adapter

User Guide

3.2 Linux Platform Feature Set

lists the features supported by Solarflare adapters on Red Hat and SUSE Linux distributions.

NOTE:

Red Hat Enterprise Linux versions 5.5 and 6.0 include a version of the Solarflare adapter

driver. This driver does not support the SFN512x family of adapters. Red Hat Enterprise Linux 5.6
and 6.1 includes a version of the Solarflare network driver for the SFN512x family of adapters. To
update the supplied driver, see

Installing Solarflare Drivers and Utilities on Linux on page 43

Table 14: Linux Feature Set

Fault diagnostics

Support for comprehensive adapter and cable fault diagnostics
and system reports.

• See

Running Adapter Diagnostics on page 53

Firmware updates

Support for Boot ROM, Phy transceiver and adapter firmware
upgrades.

• See

Upgrading Adapter Firmware with Sfupdate on page 70

Hardware Timestamps

Solarflare Flareon SFN7122F

1

SFN7142Q

1

and SFN7322F

adapters support the hardware timestamping of all received
packets - including PTP packets.

The Linux kernel must support the SO_TIMESTAMPING socket
option (2.6.30+) to allow the driver to support hardware packet
timestamping. Therefore hardware packet timestamping is not
available in RHEL 5.

1. Requires an AppFlex license - for details refer to

Solarflare AppFlex™

Technology Licensing. on page 12

Jumbo frames

Support for MTUs (Maximum Transmission Units) from
1500 bytes to 9216 bytes.

• See

Configuring Jumbo Frames on page 51

PXE and iSCSI booting

Support for diskless booting to a target operating system via
PXE or iSCSI boot.

• See

Configuring the Boot ROM with sfboot on page 56

• See

Solarflare Boot ROM Agent on page 344

PXE or iSCSI boot are not supported for Solarflare adapters on
IBM System p servers.

Receive Side Scaling (RSS)

Support for RSS multi-core load distribution technology.

• See

Receive Side Scaling (RSS) on page 85

«
...
43
44
45
46
47
...
»

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов