Solarflare SFA6902F Скачать руководство пользователя страница 212 | Manualshive

Страница: 212 / 375

Solarflare SFA6902F Скачать руководство пользователя страница 212

Issue 11

© Solarflare Communications 2014

207

Solarflare Server Adapter

User Guide

4.25 Completion codes (%errorlevel%)

lists the completion codes returned by the command line utilities. The code may be

determined by inspecting

%errorlevel%

Table 52: Completion Codes

Error code

Description

0

Success.

1

The application was invoked with /? or /help.

3

The application was invoked with /version.

16

Application cancelled (user probably pressed CTRL-C).

17

Application has requested a reboot.

18

Reboot is necessary to complete the action.

19

Incomplete team creation.

Team has been created and whatever adapters that could be added
have been, and the VLANs (if any) have been created. Some adapters
were not able to be added.

32

Application failed initialization.

33

Access denied.

Either the remote host refused a connection on the basis of account
privileges, or a file could not be opened.

34

Cannot connect.

The remote host could not be found or refused the connection
because the WMI service was inaccessible (either because the service
is not running or because there is a firewall or security policy
preventing it being accessed remotely).

35

WMI classes exposed by the Solarflare drivers missing.

Usually this means that either the driver have not been installed, no
Solarflare adapters are present, or adapters have been disabled.

36

Failed to obtain driver lock.

The application has tried to take the Solarflare driver lock because it
wants to do something that must not be interrupted by another utility
(or SAM) and failed to do so.

37

Adapter not found.

Cannot find the adapter specified by /adapter.

«
...
210
211
212
213
214
...
»

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов