SolarEdge StorEdge BI-NUSGN-01, Руководство по установке

Страница: 10 / 30

Chapter 2: Installing and Connecting the
Backup Interface
This section explains how to install the Backup Interface and connect it to the inverter,
AC loads panel and grid.
Package Contents
Backup Interface
Mounting bracket
Conduit holder
Accessories bag that contains:
Bonding for connecting the neutral and grounding bar
Two mounting bracket screws
One conduit holder screw
Allen key (affixed to the bottom of the Backup Interface)
Installation guide
Mounting the Backup Interface
Before you begin
The conduit entries are closed with drill guides. Drill the conduit entries open before
mounting the Backup Interface.
CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting
techniques, and if required - a lifting aid.
ATTENTION!
Objet lourd. Pour éviter la fatigue musculaire ou des blessures au dos, utilisez
des techniques de levage appropriées et, si nécessaire - un auxiliaire de levage
lors du retrait.
NOTE
Make sure the mounting surface or structure can support the weight of the
Backup Interface and bracket, and make sure that it spans the width of the
bracket.
NOTE
If installing the Backup Interface in the line-side of the main service panel,
maintain a distance of not more than 25 ft from the main service panel.
Chapter 2: Installing and Connecting the Backup Interface 9
Backup Interface Installation Guide MAN-01-00728-1.0