9. Select PT Scaling and set the potential transformer ratio.
The default value is 1.
Configuring Dual-Meter Connection using
the Device Display
To configure the SolarEdge device using the device
display:
1. Enter Setup mode, scroll to the
Communication
menu and
select
Communication
è
RS485-x Conf.
The following screen is displayed:
D e v i c e T y p e < S E >
P r o t o c o l < M >
D e v i c e I D < 1 >
S l a v e D e t e c t < # >
L o n g S L V D e t e c t < # >
S l a v e L i s t < # >
M u l t i - I n v . S e t
2. Select
Device Type
. the following screen is displayed:
S o l a r E d g e < M >
N o n - S E L o g g e r < S >
M u l t i D e v i c e s < M >
N o n e
3. Select
Multi Devices
. The following screen is displayed:
Energy Meter with Modbus Connection Installation Guide MAN-01-00269-1.5
Appendix B: Installing Two Meters
57
