4.5
With the motor installed, you can finish assembly of the airship. Remove the rest of
the
ribs (31-34)
and assemble them as shown with dabs of glue where needed.
ASSEMBLY STEPS
The ribs look best when installed with the
clean side up, as shown below:
clean side up
laser-charred
side down
4.6
With the dirigible fully finished, balance
the assembly onto the top of the tower.
By design, it should balance practically
level, but if you find it is leaning to one
side, review the Troubleshooting section
for solutions.
For best effect, place it in a well-lighted
area. Even the top shelf of an office
bookcase near a fluorescent fixture
gives a pleasing performance.
(31)
(32)
(33)
(34)
The Paris Flyer CarouSol Kit
11
