How to use:
1. Flip the 2 supports out of the case (See Fig. 1 & Fig. 2)
2. Unfold the solar briefcase (please note that the top and bottom of the briefcase are held together when closed by magnets which are built
into the handles)
3. Place the solar briefcase in a position that will receive direct sunlight (See Fig 3.)
4. Tilt the solar briefcase so that is has maximum exposure to the sun. When using, ensure the solar panel itself is facing the sun and ensure
the panel is not in the shade and that there are no shadows being cast on the solar panel. It is best to place the longest side of the solar
panel facing south.
5. The blue LED will flash whenever the solar briefcase is generating electricity.
6. Choose the right main connector for your application (see Fig.3 images 8, 9 and 10) and attach it to the connecting cable to be connected
to the charge regulator. ( See Fig.4, images 9a, 9b and 9c)
7. Please note: the cables that attach to the charge regulator (See Fig.4 images9a, 9b and 9c) are labelled for your convenience to ensure that
the correct cable is used.
8. The cable to connect the 12V cigarette lighter output (See Fig.3 images 9 and 10) must be connected to the charge regulator using the
cable featured in Fig.4 image 9a. This cable is labelled load.
9. The cable to connect the battery, which is terminated in crocodile clips (see Fig.3 image 8) must be connected to the charge regulator
using the connecting cable featured in Fig.4 image 9b. This cable is labelled battery.
10. The cable to connect the solar panel (built-into the solar briefcase as seen in Fig.3 image 6) to the charge regulator is the connecting cable
featured in Fig.4, image 9c. This is labelled solar.
11. Connect the connector to your application
12. A built-in blocking diode prevents reverse charging from the battery to the solar panel at night, ensuring your battery is not flattened.
Please Note:
In some makes of vehicle and boats, the cigarette lighter may not operate when the ignition is turned off. If this is the case, you can connect
directly to the battery using the cable terminated in alligator clips (See Fig.3 Image 8).
You must disconnect the solar briefcase from your cigarette lighter or battery when starting the engine or driving. Electrical surges when starting
the engine or when the engine is running may damage your solar briefcase.
1.
Handle
2.
Supports
3.
Solar panels
4.
Magnets built into handle
5.
Coil post
6.
Main cable to connect charge regulator
7.
Charge indicator
8.
Main connecting cable with
alligator clips (battery clamps)
9.
Main connecting cable with
lighter plug
10.
Main connecting cable with
lighter socket
1
1
2
2
3
3
4
5
6
7
8
9
10
Figure 1
Figure 2
Figure 3
