October 2018 | Solar Stik®, Inc.
4 |
Instruction Manual for Reprogramming the DSE 3110
9. This screen will appear
with the prompt: “Write this
configuration?”
Click “Yes” (arrow).
10. Click “OK” (arrow) after the
green progress bar reaches
100%. The new file configuration
has been uploaded.
11. Disconnect the USB cable from the DSE 3110.
12. Turn off the generator power switch.
13. Reinstall the module onto the generator. It may help to gently adjust the cables that are fed
through the back of the controll panel enclosure to make room for the control panel.
8. Click the “Write to module” icon
(arrow). (
Note:
Two similar icons
are side by side. Click the one on
the left.)
Write to module
