Doc: ELE16PH33A
Page 3
MOTOR STOP ADJUSTMENT INSTRUCTIONS
PLEASE NOTE THAT THE DROP HAS ALREADY BEEN PRE-SET TO THE REQUIRED DIMENSION.
THESE INSTRUCTIONS ARE TO MAKE
ADJUSTMENTS
ADJUSTMENTS
ADJUSTMENTS
ADJUSTMENTS
ONLY.
220 - 240 Volt 50/ 60Hz 80 Watt
Insert the hex-key supplied, into the relevant hex socket. Turn the key in the direction of the
+
to increase the rotation of the roll tube or in the direction of
-
to reduce the number of times
the roll tube rotates.
Low Voltage - 24 Volt DC Motors
'STOP' POSITION
AT TOP
'STOP' POSITION
AT BOTTOM
ADJUST THE 'STOP' POSITIONS
USING THE SUPPLIED HEX-KEY. IF
THE
MOTOR IS FITTED TO THE R/H
SIDE
THE SAME ADJUSTERS SET THE
SAME 'STOP
'
POSITIONS
STOP
POSITION
ADJUSTERS
THE STOP POSITION ADJUSTERS
HAVE ARROW SHAPES TO SHOW
THE DIRECTION THEY CONTROL
MOTOR IS SHOWN IN POSITION USING A
FACE FIX MOTOR BRACKET WHICH CAN
ALSO BE USED FOR TOP FIXING
