C h a i n H a n g i n g - T h r e e S i n g l e H e a t e r s J o i n e d
1. Please refer to Table 1 for recommended positioning of the heater. When hanging four chains of equal length and
gauge are required and should be selected with fixings that are adequate to hold the weight of the heater assembly. If in
doubt contact a professional for advice!
2.
Attach the heater assembly to the chains via the hole in the centre of the joining bars as shown in Fig. M. and ensure
the heater assembly faces directly down when hanging.
3. Secure the supply cables so they do not rest on the body or obstruct the air-vents.
Fig. M
8
Fig. L
1. Securely fasten the L-shaped wall brackets to the mounting surface using both of the fixing holes in the short part of
the bracket (see Fig. L for mounting hole centres). Please refer to Table 1 for recommended positioning of the heater.
Please note. wall fixings are not supplied. They should be selected to substantially support the weight of the heater
assembly. If in doubt contact a professional for advice!
2. The heater assembly should be mounted with the terminal boxes positioned at the bottom of the heaters.
3.
Fix the heater assembly to the brackets via the bolt threads on the middle heater. A serrated washer should be placed
on the threads first and the wall brackets should prise apart in order to fit the threads in place.
4.
Place a washer and a nut on the thread on the outside of the wall brackets – both sides.
5.
Securely tighten the nut and bolts with heaters in line with each other (as assembled on flat surface).
6.
Secure the supply cables so they do not rest on the body or obstruct air-vents.
DRILLING HOLE TEMPLATE DIMENSIONS
FOR WALL MOUNTED BRACKETS
Observe the minimum safe distance between the heater body and inflammable surfaces and objects when mounting.
Please refer to Table 1 for the recommended positioning of the heater with regards to minimum distances. Do not install
the heater in a corner!
Keep out of the reach of children.
Always isolate the heater from the mains supply when adjusting the position.
