Manual 2100-723
Page
6 of 39
NOTE:
When installing new filters, make sure that
airflow arrows on filters point up.
7. Reverse the steps above to switch from 1" to 2"
filters.
FIGURE 6
Remove Four Screws
FIGURE 7
Re-Install Filter Support Brackets into Upper Slots
3. Pull the brackets out towards the front of the unit.
The back of the bracket will slip out of the lower
slots at the back of the filter tray.
4. Re-install the filter support brackets into the upper
slots at the back of the filter tray (see Figure 7).
5. Re-install the four (4) screws into the lower
screw holes on the filter support brackets. If the
tabs have been bent down, they will need to be
straightened out to be used.
6. Install the right 1" filter first followed by the left
filter (see Figures 8 and 9).
Upper slots for
1" filters
Lower slots for
2" filters
FIGURE 8
Install Right 1" Filter
FIGURE 9
Install Left 1" Filter
FIGURE 4
Filter Tabs in Down Position
FIGURE 5
Bend Filter Tabs to Up Position
