SOLAC Siphon Brewer 3-in-1, Инструкция по эксплуатации, Страница: 7 / 25

ES
EN
(Original instructions)
•
10. Rinse the siphon tube with cold water in
order to cool off, then you can remove it from
the lid.
•
11. Place the jar lid over the jar aligning the
“UNLOCK” line with the handle´s mark, turn
the lid clockwise until “POUR” line match with
the mark of the handle and pour.
•
¡CAUTION! PLACE THE LID OVER THE JAR
BEFORE SERVING
HOW TO DISASSEMBLE?
•
a) Mesh filter: Take out the mesh filter from the
jar by turning it strongly counter clockwise to
release it and lift.
•
b) Upper vessel: Hold the jar´s handle with one
of your hands, and then turn the upper ves-
sel counter clockwise from its handle with the
other hand to release and lift.
•
c) Take out the siphon tube from the jar by tur-
ning it counter clockwise to release and lift.
•
CAUTION! IF THE APPLIANCE HAVE BEEN
RECENTLY USED AND STILL HOT DON´T
USE YOUR BARE HANDS TO REMOVE
THE TUBE, PLEASE USE THE JAR´S LID
FOLLOWING THE STEP NUMBER 9 FROM
“COFFEE MODE” INSTRUCTIONS
CLEANING PROCEDURE
BEFORE USING THE APPLIANCE FOR THE
FIRST TIME
•
1. Wash thoroughly every single part of your
coffee machine with a soft sponge, water and
soap, with the exception of the heating plaque.
•
2. Follow the instructions in order to perform
one coffee cycle without putting any coffee into
the upper vessel.
CLEANING DIRECTIONS
•
1. Always remember to turn the appliance off
and unplug it from the electric power source.
Remove the heating plaque, since this particu-
lar item cannot be submerged or be washed
with water.
•
2. Wash the jar, siphon tube, jar and upper
vessel lids with a sponge, water and dish wash
light soap, please allow them to dry complete-
ly before assemble them again. DO NOT USE
ANY ABRASIVE FIBERS.
•
3. The upper vessel must be washed with hot
water and a soft sponge in order to maintain its
crystal clear appearance.
•
4. It is our recommendation to wash the mesh
filter with small brush so that you can remove
thoroughly the ground coffee residuals.
•
5. Clean the heating plaque with lightly wet
cloth.
•
6. All ensemble parts with the excep-tion of the
heating plaque are dish washer suitable.
•
7. Do not use any solvents, or acid factor PH
substances, or any abrasive product while cle-
aning your appliance.
•
8. Do not submerge or get the heating plaque
wet, or hold it directly under the water tap.
•
9. We recommend to clean the appliance regu-
larly and remove the ground coffee residuals
after every use.
•
10. You must wait for every washable ac-
ce-ssories to completely dry before ensemble
them back and use the appliance again.
DECALCIFICATION
•
In order for your coffee machine to continue its
perfect way of preparing your beverages, from
time to time you must get rid of the minerals
residuals left behind by the hardness of the wa-
ter with a specific anti-calc product suitable for
your coffee machine.
•
The frequency with which you will have to
perform this operation may vary depending
the water hardness of every location and how
much you use your coffee machine. If you use
your appliance twice a day follow this guide-
lines:
•
Soft water, every 6 months
•
Medium hard water, every 2 to 3 months
•
Hard water, every 6 to 8 weeks.
•
Fill your coffee machine with the anti-calc pro-
duct as if you were preparing coffee and once
the process ends, rinse thoroughly and repea-
tedly with water before using your appliance
again.