SOLAC ID7840, Инструкция по эксплуатации

Страница: 12 / 13

TROUBLESHOOTING
Problem Causes Solution
It does not work
Y ou've just purchased the prod -
uct or it has been left unused for
more than 3 months.
Charge the unit for at least 16
hours
It only works for a few min -
utes even after charging
The battery has reached the end
of its lift cycle.
Contact service center for sup -
port.
Charge the unit for at least 16
hours
W ater pressure is very low
There is dirt stuck in the nozzle
Replace the nozzle
The nozzle is deformed
The charging
indicator does not
illuminate when
charging.
The power plug has
not been connected
well.
Please connect
the power source
well.
Circuit malfunction
Contact service center for sup -
port.
W ater does not come out
The tank is empty Fill up tank
The irrigator is tilted too much
while in use
Use with the appliance in a
vertical state
Pump malfunction
Contact service center for sup -
port.
CLEANING
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry .
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running wate r.
ANOMALIES AND REPAIR
-T ake the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY :
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.