SOLAC ET8924, Инструкция по эксплуатации

Страница: 13 / 38

13
en
Operating mode (models: ET8924, ET8926, ET8928, ET8930,
2 When the heat emitter is switched on, the microprocessor reads the
internal memory of the appliance and loads the last mode selected by
the user. On connection for the first time, the memory is empty.
Therefore, the screen will blink on and off until one of the keys is
pressed.
3 While the appliance is working, the screen shows the temperature and
the operating mode selected: comfort, saving, anti-frost, off and
programming.
• The H symbol remains on while the element is working.
Comfort temperature adjustment
1 By pressing the (+) and (-) keys you can select the desired room
temperature. The temperature changes by 1º C every time you press a
key. If you hold the key pressed, the temperature changes automatically
by 1º C every 0.25 seconds.
2 Once the temperature is assigned and after a certain period without
pressing any keys, the appliance memorises the selected temperature.
Selecting the mode
1 Press the (M/OK) key to select the operating mode. Every time this key
is pressed for more than 0.1 sec., the thermostat changes from one
mode to the next: Comfort – Saving – Comfort, etc.
2 To access the “anti-frost” mode, press the (M/OK) key until the
N
icon
appears on the screen.
COMFORT SAVING ANTI
-
FROST OFF PROGRAMMING
s l N G
PROG
MODE TEMPERATURE
COMFORT Selected with the (+), (-) keys
SAVING Comfort temperature minus 3 ºC
ANTI-FROST 7 ºC
OFF Off
ET8924.book Page 13 Friday, June 22, 2007 11:18 AM