12
OPERATION
This coffee maker includes a filter holder developed by Solac, the
Comfort Clean (4), which does not require any accessories for making 1
or 2 cups, using ground coffee or single-dose pods.
4 To make two cups of coffee, set the selector (5) to position 1 (fig 2). The
filter will move downwards allowing you to add two doses of ground
coffee. Use the dispenser spoon to do this, without exceeding the spoon
level.
5 To make just one cup, set the selector (5) to position 2 (fig.3). The filter
then moves up to the intermediate position allowing you to add one dose
of ground coffee or a single-dose pod.
6 Lightly compress the ground coffee.
B. Starting the coffee maker
7 Next, place the filter holder (4) in the coffee-maker.
8 Make sure the filter holder is securely closed, pushing the handle firmly
from left to right, as it may drip otherwise (Fig. 3).
9 Install the cup-holder tray (15) according to the size of the cups you are
going to use (fig. 4):
A. Small cups
B. Large cups
10 Place one or two cups under the coffee outlet holes (13).
11 When the mains pilot light (1) turns green, turn the coffee extraction
selector (2) to the left until the selector mark points to the cup icon (fig.5).
The coffee will start to come out.
12 Once the required amount of coffee has come out, turn the selector (2)
back in the opposite direction to the de-pressurisation position (fig. 6) to
stop the coffee from coming out and vent the residual pressure in the
filter holder.
C. Cleaning
• To remove the coffee dregs or single-dose pod, turn the selector (5) to
position 3 (fig 7). The entire filter will move to the edge of the filter holder
so that the dregs can easily be expelled.
• If you used a single-dose pod, remove the bag and put it in the rubbish.
B. STEAM
To heat any type of liquid using the steam nozzle (10):
