manualshive.com logo in svg

Sola HD S4K2U1000C, Руководство пользователя

Поделиться
Скачать
Sola HD S4K2U1000C Скачать руководство пользователя страница 31

S4K2UC SEriES USEr MAnUAl  | 

31

5.0 Communication

This section describes UPS communication over the three types of communication connections on the rear of the S4K2UC:

 

♦

IntelliSlot port

 

♦

USB port (standard B-type)

 

♦

Terminal block communication

!

 CAUTION

To maintain safety (SELV) barriers and for electromagnetic compatibility, signal cables should be segregated and run separately 

from all other power cables.

5.1 IntelliSlot Communication Cards

The IntelliSlot port accepts two optional cards:

 

♦

IntelliSlot SNMP card (Catalog number: SNMPWEB CARD)

 

♦

IntelliSlot Relay card (Catalog number: RELAYCARD INT)

The IntelliSlot SNMP card (Catalog number: SNMPWEB CARD) provides SNMP monitoring and control of the UPS 

across the network.
The IntelliSlot Relay card (Catalog number: RELAYCARD INT) provides dry contact relay outputs for custom-wired appli-

cations and delivers support for built-in shutdown for AS/400 systems.
Follow instructions provided with the IntelliSlot card to configure MultiLink, the UPS or any additional ancillary product for 

the S4K2UC. These instructions are also available at: www.solahd.com/multilink.

5.1.1 MultiLink

MultiLink monitors the UPS continuously and can shut down your computer or server in the event of an extended power 

failure. MultiLink can be configured to shut down the UPS as well.
MultiLink can also be configured for use without the USB cable when the IntelliSlot SNMP Card (Catalog number: 

SNMPWEB CARD) is installed in the UPS. An optional MultiLink license kit permits shutting down the UPS over a 

network. For more information about the MultiLink license kits, visit our Web site at: www.solahd.com or contact SolaHD 

at: (800) 377-4384/(847) 268-6000.

5.2 USB Port Communication

The standard B-type USB port is used to connect the UPS and network server or other computer system using MultiLink. 

The Configuration program can be completed through the communication port.

Содержание S4K2U1000C















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды