S4K2U-5C SERIES USER MANUAL |
19
5.
Extend the bracket assembly by sliding the front member forward until it touches the rack’s front vertical rails (adjust-
able length: 457–813 mm/18–32 in.). Use two M5 screws to fix each front member onto the front vertical rails through
the installation holes. Make sure that bracket assemblies are at the same mounting height on all four rack rails, as
shown in Figure 10.
Rear
Member
Front
Vertical
Pole
Front
Member
M5 Screw
(4 pcs)
Slide
Figure 10: Installing front member of each bracket assembly
6.
Fasten rear member and front member together using four M4 screws and four M4 nuts (M4 nuts have been installed
on the rear member before delivery) per bracket assembly as shown in Figure 11.
M4 Screw (8 pcs)
Rear Member
Front member
M4 Nut (8 pcs)
Figure 11: Fastening rear member and front member together
