3
A
Prepare resistors with the bending tool.
In order for the
resistors
to fit properly between the eyelets, the leads must be bent exactly in the correct location. To make this
easier, we have designed a simple yet functional bending tool. Simply place the resistors in the notch and bend the leads down
straight along the wooden edge. The part will now fit perfectly between the eyelets.
Insert resistor:
Bend one leg down:
Bend the other leg down:
Bent
Resistor before
You will need these parts:
4 x resistor 470 Ohm, 1 x bending tool
Notch:
