No.
76335
Firmenanschrift aufbewahren -
Keep the address of the company -
Veuillez conserver l'adresse -
Adres bewaren -
Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare
Kleinteile!
Not suitable for children under 3 years! -
Contains small parts!
Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées!
Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!
Tel.: +49 (0)7502 - 94115-0 - Fax: +49 (0)7502 - 94115-99
www.sol-expert-group.de
SOL-EXPERT group
, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
SOL-EXPERT
group
group
MADE IN EUROPE
10+
Return the device
to a certified provider at
the end of its useful life!
IMPORTANT SAFETY NOTES
Keep this manual for future reference! It contains important information.
This kit is intended for USB power only.
The soldering iron, solder and the parts being soldered become very hot. Be very careful!
Always use a mat when soldering! This prevents parts and the circuit board from slipping.
We recommend using a soldering iron holder to set the soldering iron down safely during use.
Never connect the kit to 230 V mains voltage!
Acute danger to life!
Generally:
Please return the circuit board to a certified provider at the end of its useful life. These will then ensure it is disposed of in compliance
with directives. This is good for the environment and an important part of actively protecting the environment.
ENVIRONMENTAL NOTES
Christmas tree with candle LEDs
Soldering kit,
powered via power bank
or USB port
Recommendation for children
and teenagers:
Assembly and
soldering should be supervised
by an adult.
4 037373 763351
Qty.
Part
Value/Description
1
Circuit board
96610
12
LED 5 mm (LED1 - LED12)
Orange colour, flickering
2
Resistor (R1/R2)
47 Ohm
2
Resistor (R8/R9)
56K Ohm
1
Resistor (R10)
620 Ohm
2
Capacitor (C3/C4)
47 uF/10V
2
Transistor (T3/T4)
BC547B
1
Switch (SW1)
SS12D01
1
USB connector
assembled
1
Front panel
2-pc.
The Christmas tree with flickering candle LEDs soldering kit
The Christmas tree soldering kit usees real flickering LEDs.
These flickering orange LEDs simulating candlelight add a
great touch to this kit and add a Christmas ambiance.
The lights can be set to steady or blinking. A great electronics
building kit to use for decoration or anybody wishing to learn how to
solder. The included plywood front panel can be decorated for Christmas before attaching it.
Dimensions: 100 x 70 mm.
The 'Christmas Tree' electronics building kit is powered via power bank or via USB port. This eliminates costly batteries.
The kit with over 25 parts is an excellent introduction to soldering.
Parts list
Check and sort out parts
BC547B
You will also need:
Soldering iron, solder, wire cutters, tweezers, power bank or
USB port
47 uF
QR Codes
Cliquez ici pour les instructions:
Klik hier voor de instructies:
https://www.sol-
expert-
group.de/All-about-soldering/Smart-
kits-for-soldering/Christmas-tree-with-
candle-LEDs-solder-
kit::1265.html?language=en
https://www.sol-
expert-
group.de/Autour-de-la-soudure/Kits-
astucieux-pour-la-soudure/Arbre-de-
Noel-avec-des-bougies-LED-kit-de-
soudure::1265.html?language=fr
https://www.sol-
expert-
group.de/Rond-solderen/Clever-kits-voor-
het-solderen/Kerstboom-met-kaarsleds-
soldeerkit::1265.html?language=nl
Click here for the instructions:
Hier geht es zur Anleitung:
https://www.
sol-expert-
group.de/Rund-ums-Loeten/Pfiffige-
Loetbausaetze/Weihnachtsbaum-mit-
Kerzen-LEDs-
Loetbausatz::1265.html?language=de
Conrad No.
1818581
