85
15.SETTING-OUT MEASUREMENT
Setting-out measurement is used to set out the required point.
The difference between the previously input data to the instrument (the setting-out data) and the measured
value can be displayed by measuring the horizontal angle, distance or coordinates of the sighted point.
The horizontal angle difference distance difference, and coordinate difference are calculated and displayed
using the following formulae.
Horizontal difference
Displayed value (angle) = Horizontal angle of setting-out data - measured horizontal angle
Displayed value (distance) = measured horizontal distance x tan (horizontal angle of setting out data
- measured horizontal angle)
Slope distance difference
Displayed value (slope distance) * = measured slope distance - slope distance setting-out data
* Horizontal distance or height difference can be input in the above formula.
Coordinate difference
Displayed value (coordinates)* measured N setting-out coordinates - N coordinates of setting-out data
* E or Z coordinates can be input in the above formula
Height difference (REM setting out measurement)
Displayed value (height) = measured REM data - REM data of setting out data
• Setting out data can be input in various modes: slope distance, horizontal distance, height difference,
coordinates and REM measurement.
• It is possible to allocate Operating icons in the Setting-out measurement menu to suit various applications
and the ways that different operators handle the instrument.
"19.12 Allocating Operating Icons"
•
[TRK On]
can only be selected on the Auto Tracking model.