Sokkia iM-50 Series Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 228

Sokkia iM-50 Series Скачать руководство пользователя страница 88

83

19. TOPOGRAPHY OBSERVATION

6. Register collimation point.

Set the name for the collimation point in advance. Press

[ADD]

, enter the point name and press

[OK]

to register.

After registering the point to be measured, press

[OK]

to

move to measurement.

"19.2 Observation"

If "No" is set for (4) Pre-entered point registration
(PreenterPt) in the observation setting, this screen is not
displayed.

• Pressing

[DEL]

deletes the selected point.

• Pressing

[EDIT]

enables to change the name of the

selected point.



• Pressing

[TOPO II]

in the OBS mode also enables the same procedure.



[TOPO II]

allocation: "33.11 Allocating Key Functions"

• Number of characters, range and choices of the setting are as follows (*is the default setting):

• Number of distance sets: 1 * /2
• Number of distance readings: 1 * (Fixed)
• RL observation: Yes / No *
• Pre-entered point registration: Yes / No *
• Backsight distance measurement (BS Obs-Dist): Yes (the distance is to be measured in the backsight

direction) / No (only the angle is measured in the backsight direction) *

• Backsight distance check (BS DistCheck): Yes (Compares the backsight point coordinate and the

measured value for the backsight point) / No *

• If "No" is set for "RL observation", "number of distance sets" is fixed at "1".
• If "Yes" is set for "RL observation", a choice for the "number of distance sets" is 1* / 2.
• "BS DistCheck" is set only when "Yes" is set for "BS Obs-Dist".

Begin topography observation according to the setting specified in "19.1 Observation Setting".

PROCEDURE Topography Observation

1. Perform observation setting following steps 1 to 6 in the

"19.1 Observation Setting".

19.2 Observation

PreenterPt

01: T-1

02: T-3

03:

04:

ADD

DEL

EDIT

OK

PreenterPt

PT

T-4

«
...
86
87
88
89
90
...
»

Содержание iM-50 Series





































































































































































































































Отзывы:

Нет отзывов