Sokkia GSR2700 ISX, Руководство по эксплуатации

Страница: 39 / 106

GSR2700 ISX Operations Manual 29
Display Panel Operations
Chapter 3
range. Wait a few minutes for the receiver to cool down, then
resume operation.
If you see one of the two sequences shown in Table 15, then the
receiver is operating near or outside of the valid voltage range.
Ensure the internal batteries are charged or check your external
power source.
If you see the sequence shown in Table 16, then the receiver
firmware has not been loaded with a valid authorization code.
Contact your SOKKIA distributor with your receiver serial
number to obtain the code.
If an error condition persists, take the following steps:
1. Turn the receiver off for a few minutes.
2. Perform a factory reset (see Table 8, Power Button Functions ,
page 21).
Table 14: Temperature Issues
1 2 3 4 5 6
R R Y R R Y R Y R Y
R R Y R R Y R Y R
R Y R Y R Y R Y R Y R
Table 15: Voltage Issues
1 2 3 4 5 6
R R Y R Y R R R
R Y R Y R Y R Y R R Y
Table 16: Firmware Issues
1 2 3 4 5 6
R R Y R Y R R Y R