Sokkia GCX2 Скачать руководство пользователя страница 40

Страница: 40 / 49

Specifications

P/N: 1005278-01

• • • • • •

Specifications

The GCX2 is a GNSS receiver featuring 226 channels and Long-Range Bluetooth Technology

for small job site

operations and cable-free network solutions.

General Details

Table 9 lists the GCX2’s general specifications.

Table 9. General GCX2 Specifications

Physical

Enclosure

Aluminum alloy with Lexan cap

Color

Sokkia Gray and Blue (base)

Dimensions (mm)

47 (w) x 47 (d) x 184.5 (h) mm

Weight (g)



including battery

Up to 375g, depending on the configuration

Status
display/panel

MINTER (4 LEDs + 1 power button)

USB/Power

USB Mini B 2.0 (for communications and power)

Bluetooth antenna

Fully integrated, high-sensitivity

Tracking

Number of
Channels

226 channels with optimized satellite tracking technology



NOTE:

Includes two dedicated channels for L-Band signal tracking. The GCX2 receiver does not

support L-Band signal tracking.

Tracked Signals

GPS: L1 C/A, L1C, L2P, L2C code and carrier
GLONASS: L1 C/A, L1P, L2 C/A, L2P code and carrier
SBAS: L1 C/A, WAAS/MSAS/EGNOS
QZSS: L1 C/A, L1C, L2C
GAGAN: L1

Multipath
reduction

Yes, code and carrier

PLL/DLL setting

Adjustable bandwidth and order

Smoothing
interval

Pseudorange smoothing: Adjustable

Data Output

RTK Corrections

TPS, RTCM SC104 v 2.x, 3.x; CMR/CMR+

ASCII Output

NMEA 0183 version 2.x and 3.0

RTK position data
rate

10 Hz

Measurement
data rate

10 Hz

Real time data
output

TPS; RTCM SC104 v 2.x and 3.x; CMR/CMR+

NOTE:

CMR/CMR+ is a third-party proprietary format. Use of this format is not recommended and

performance is not guaranteed. Use of industry standard RTCM 3.x is always recommended for
optimal performance.

Содержание GCX2

















































Результаты поиска

Содержание GCX2

Отзывы:

Бренды по названию

Популярные бренды

Sokkia GCX2, Руководство оператора

Результаты поиска

Содержание GCX2

Отзывы:

Бренды по названию

Популярные бренды