Soham Impex 200 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 22

Soham Impex 200 Скачать руководство пользователя страница 4

1. Main purposes and features

1.1 Main purposes

IGBT

inverter gas-shielded welders of

GMAW/MIG

series include Model

200, 300, and 400. They are mainly applicable to CO2-shielded welding,
consumable electrode argon arc-welding (GMAW/MIG), and mixed gas-
shielded welding (GMAW/MAG). They conform to safety requirements
of arc-welding equipment technical requirements of the welder

The model description of the series conforms to standards of model

description for the arc welder.

1.2 Features

IGBT high frequency inverter technology is used. Up to 20KHz inverter

frequency provides fast dynamic response.
Use of current control mode provides high quality and reliable

performance.

Total digital presetting and display of welding current/voltage provides a

visual and convenient operation.

Current self-adaptation within 30mm dry extension is applicable to all-

position welding.

Perfect protection circuit and fault display function provides safety,

reliability, and convenience to locate a fault.

Metal transfer waveform control provides stable electric arc, little

splashing, and well-shaped welding lines.

Arc-striking and ball removal circuit is added to guarantee the arc-

striking success rate.

Small dimension, low weight, high efficiency, energy saving, high duty

cycle, and no noise

Reasonable structure and concise layout provides convenient

maintenance.

Applicable to CO2 /MIG/MAG welding with solid/flux-cored welding

wire of different welding specifications

Stable welding process and strong immunity against power grid

fluctuation ( 280~480V)

«
...
2
3
4
5
6
...
»

Содержание 200























Отзывы:

Нет отзывов