clockwise direction to decrease. The light diode will automatically turn off after 8
Technical Specification
seconds when the music stops.
Voltage: AC110V-130V/200V-250V, 50HZ-60HZ/ Fuse: 3A/250V
AUTO
Rated Power: 75W
Auto cycles the built-in programs without being controlled externally. It has no light OFF.
LED Light: 10W x 7pcs RGBW LED diodes
Working Modes: DMX, Sound Active, AUTO, Master-Slave
The mode allows a single unit to react to the beat of the music in the master mode.
DMX Control Channel: 4 and/or 9 channels
1. Install the units in a suitable position (laying or appending).
Advanced LED technology, Popular using in world.
2. Set dipswitch to select Sound Active or AUTO mode.
Extremely long life (rated 60,000 to 100,000 hr.)
3. Turn on the unit power, the unit begins reset, then the unit begins working.
Very low power consumption, no duty cycle runs all light.
4. The unit will react to the low frequencies of music via the internal microphone.
Super bright for indoor use.Built-in automated programs via stand alone mode by Menu Button.
Adjust the audio sensitivity knob on the back of the unit to make the unit more or less
4 Digit Digital LED Display
sensitive in sound active.The panel has LED indicating for sound active.
Lighting effects: adjustable strobe speed, color change, adjustable brightness
3 pin male & female XLR interface
Master-Slave Operation
Light body: plastic
This mode will allow you to link up to 32 units together without controller.
Working condition: indoor use only
1. Install the units in a suitable position (laying or appending).
Working environment temperature: 0
-40
2. Choose a unit to function as Master mode, set dipswitch to select Sound Active or
Cooling system: air cool
AUTO mode. The others must be set to Slave mode, set dipswitch to select Slave mode.
Item Size: 18cm*10cm
3. Use standard XLR microphone cable chain your units together via the XLR connector
Net weight: 1.1kg.
on the rear of the units. For longer cable runs we suggest a terminator at the last fixture.
Gross weight: 1.5Kg (inner box), Kg (outer box)
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
Inner box: 225*210*170(0.008m3), Outer box: 465*435*561(0.114m3), 12pcs/carton
Fixture Dimension
Cable Connectors
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
Caution: Do not allow contact between the common and the fixture’s chassis ground. Grounding
Page 6
Page 3
10cm
18cm
5.3cm
14cm