-3-
only for Portable Dometic Toilet
(970 series - model: 972-976)
2.1
- Remove toilet upper part from the cassette
lower part and mark bore hole
- Measure 16 mm to the left of the separating
joint using a tape measure and mark.
- Measure 20 mm upwards from the pipe
flange and mark
2.2
Use hole miller to drill hole 35 mm diameter
into the discharge pipe on the marked point.
2.3
Insert bushing rubber (1) in the bore hole
Moisten bushing rubber and insert connecting sleeve (2) in the rubber then push in as far as the limit stop.
2.4
- Reassemble toilet upper and lower part.
- Insert suction hose and route upwards so as
to prevent a siphon effect.
2.5
- First separate the upper part from the lower
part when emptying
- Before pulling out the suction hose, position
the hose upwards (see photo), so that any
moisture can flow back into the cassette
1
2
20 mm
GB
